Product features:
The molded products by integrated injection molding are made of burning-resistant reinforced polypropylene,burning resistant and environment friendly.characterized with easy and convenient “block-building” installation.simple second-aw wiring and low maintenance cost.
Scope of use:
Applicable for office buildings,large-room offices and transforming old buildings.
Merit introduction of Directly-laid plastic network floor :
1.Energy-saving,environment-friendly,materials able to recycle;
2.Low headroom installation(100west 4cm construction),thoroughly change the traditional concept of office space;
3.Light deadweight able to decrease building weight load.suitable for old building reconstruction and second decoration design;
4.Enforced main board back support,stronger bearing capability than traditional network floor board;
5.45 support points each main board so as to give the building floor average bearing ;
6.Wiring not limited by a design control,able to be changed if need to increase building leasing rate;
7. Installation like block-building which is convenient and quick;
8.Wire slot extending to all directions enabling large wiring amount,and the second-time wiring is as simple as the first-time.
Product parameters:
Specifications(mm))
|
极限集中载荷(N) Specifications
|
均布载荷(N/㎡) Uniformly distributed
|
防火性能 In-combustibility
|
备注 Remark
|
500*500*40/50/60/70 |
>8850 |
>12500 |
FV-0级 |
需加铺地毯或者其他地面材料 |
Refer to the following table for specifications of each unit
Main boards |
435*435*40/50/60/70mm |
Central covering boards |
112*112*10mm |
Slot cover plate |
198*93*10mm |
Connecting piece |
145*145*15mm |
Unipanel Central cap Flank cap
Connector Back of unipanel Sound attenuation blanket
Plastic circinal uotiet The floor socket
Per square meter proportioning
4main boards+4 core cover boards+4 connections+16 slot cover plates